Flow Chart of Wet Process in Garments Washing:

WASHING

Wet Process/Chemical Process:

Wet Process

 Wet process is the main treatment for   any types of garments washing. Wet   process can be done by using different   types of chemicals. Wet process section   maintains a process flow chart, which   facilitate the whole garments washing       processes and make easy to achieve   desired garments shade.

Flow Chart of Wet Process in Garments Washing:

👉 De-size > Enzyme > Cleaning > Bleaching > Neutralize > Extracting > Drying > P.P Neutralize > Tinting > Softening > Extracting > Drying

 

All the above processes are discussed in the following table:

 

SL No.	Process	Procedure
01	De-size	It is the first process of wet process section in garments washing. Here, de-sizing process is done by using de-size chemical to remove size material from the garments.
02	Enzyme	To match with the desired shade, here enzyme process is done by using Acid or Neutral enzyme. Enzyme process can be medium enzyme, light enzyme, heavy enzyme or stone enzyme.
03	Cleaning	After completing enzyme process, garments are cleaned here by rinsing 2-3times.
04	Bleaching	Here, color can be removed uniformly from the garments and removal of color is done according to the buyer approved shade. Bleaching can be done by using K.C.I bleach or Japanese Bleach.
05	Neutralize	Bleaching chemical must be neutralize here by using Sodium meta-bi-sulphite or sodium hypo.
06	Extracting	After completing all the above processes, garments are unloaded from the machine and extracted by using hydro extractor machine.
07	Drying	Garments are dried here by using gas dryer or steam dryer. Types of dryer selection depends on the desired shade. Here, it should be noted that, gas dryer is perfect for reddish shade and steam dryer is for bluish shade. After drying, all the garments should be sent to the dry process section for P.P spray.
08	P.P Neutralize	Here, P.P sprayed garments are neutralized by using sodium meta bi-sulphite.
09	Tinting	Tinting is normally used for increasing the attractiveness of garments. Sometimes tinting is needed for matching with the desired shade.
10	Softening	This process is done for increasing softness effect of garments. Softening can be done by using cationic or non ionic softener.
11	Extracting	Finally garments are unloaded from the machine and extracting by using hydro extractor.
12	Drying	Here, garments are dried by using gas or steam dryer.

STAY WIH US WILL SEE WHY!!